> ## Documentation Index
> Fetch the complete documentation index at: https://docs.hiveinspect.com/llms.txt
> Use this file to discover all available pages before exploring further.

# Texas WDI Report (SPCS T-5) in Hive Inspect: Step by Step

> Fill in the Texas Official Wood Destroying Insect Report (SPCS/T-5) in Hive Inspect: each part of the form, your WDI license, the diagram, photos and the PDF.

In the dashboard: **Templates → Template Hub → Special PDF Only → Texas WDI 2020** · [Watch the video walkthrough](https://docs.hiveinspect.com/video-tutorials/state-forms/texas-wdi.md)

The **Texas Official Wood Destroying Insect Report** (form **SPCS/T-5**, Rev. 9/1/2020) is the WDI report Texas requires for real estate transactions. In Hive it's a **special PDF template**: you fill it in like any report, and Hive prints it on the state's official form, with your diagram and photos.

![Page 3 of a finished Texas WDI report: the part 11 Yes and No columns for each insect, 11F and 11G explanations, part 12 recommendations, and the diagram of the structure showing the residence, garage and patio with the S-P and C codes](https://mintcdn.com/hiveinspect-43c85ed1/5ead0qQxg4HJlKk_/images/how-tos/state-forms/texas-wdi-diagram-page.png?fit=max\&auto=format\&n=5ead0qQxg4HJlKk_\&q=85\&s=cf5c5bbf9dd90daf671d5b9cec0f63e2)

## Import the form from the Template Hub

Only the Hub version prints on the form. A WDI form copied from other software prints as a regular Hive report.

### 1. Open the Template Hub

Go to **Templates**, click **Template Hub**, then **Special PDF Only**.

### 2. Import the Texas WDI form

Find **Texas WDI 2020** and click **Import Template**.

### 3. Add it to your service

In [Business Tools → Services and Fees](https://docs.hiveinspect.com/business-tools/services-and-fees.md), add the template to your termite or WDI service or add-on.

## How the report is laid out

The template follows the form, one subsection per part: company, purchaser, owner, forward report, structures, treatment, signatures, notice, inaccessible areas, conducive conditions, the diagram, infestation evidence, recommendations, the purchaser's statement, and additional photos.

## Part 1: what fills in for you

| On the form | Where it comes from |
| - | - |
| Inspected address (top of every page) | The inspection's address |
| 1A. Inspection company name | Your company name, through a placeholder in the template |
| 1C. Company address and phone | Your company details, through placeholders |
| 1D. Name of Inspector | Every inspector assigned to the inspection, primary first |
| 1F. Inspection date | The inspection date |

Type your **1B. SPCS Business License Number** once in the template so every report starts with it. Under **1E**, check **Inspector is Certified Applicator?** or **Inspector is Technician?**.

![1. Company Information in the Web Editor: 1A Inspection Company Name, 1B SPCS Business License Number, the 1C company address lines and phone, and the 1E checkboxes with Inspector is Technician checked](https://mintcdn.com/hiveinspect-43c85ed1/5ead0qQxg4HJlKk_/images/how-tos/state-forms/texas-wdi-company-info.png?fit=max\&auto=format\&n=5ead0qQxg4HJlKk_\&q=85\&s=02a2539c4d33e573439916d4533f3f28)

> [!TIP]
>
> **1C. Company Address: Street** uses your full company address, so the city, state and zip print twice on the street line. Type just your street there, once in the template. Keep the placeholder in **1A**: if you clear it, the company name prints blank.

## Parts 2 to 6: purchaser, owner and structures

* **2. Purchaser Information:** starts with your client's name as the person purchasing the inspection. Pick whether they're the buyer, seller, agent or someone else.
* **3. Owner/Seller:** type the owner or seller.
* **4. Forward Report:** pick who the report is forwarded to.
* **5. Structures Inspected:** pick the structures, then the foundation, siding and roof. Each one checks its box. The form has no box for **Other**: pick **Other** and type it in the line below.
* **6. Treatment Details:** fill in only when your company treated the structure. Left blank, the warranty question prints **No**.

![5. Structures Inspected with 5A Residence selected, 5B Foundation set to Slab, and 5B Siding set to Fiber Cement Board and Brick](https://mintcdn.com/hiveinspect-43c85ed1/5ead0qQxg4HJlKk_/images/how-tos/state-forms/texas-wdi-structures.png?fit=max\&auto=format\&n=5ead0qQxg4HJlKk_\&q=85\&s=7b6fa8d4cbc01120b921d060a2445b3c)

## Part 7: signatures and your WDI License Number

Hive prints your signature, and each assigned inspector's name with their **WDI License Number** from [Profile Settings](https://docs.hiveinspect.com/settings/profile-settings.md), so add that number there. Type any apprentices, technicians or certified applicators who were present in **7B**.

## Parts 8 to 10: notice, inaccessible areas, conducive conditions

* **8. Notice of Inspection:** pick where you posted the notice and type the date.
* **9. Inaccessible Areas:** check **9A** for **Yes**; unchecked prints **No**. Then pick the areas. For anything else, pick **Other** and add it under **specify**.
* **10. Conducive Conditions:** works the same way. Check **10A**, then pick each condition. Each one checks its box on the form, next to its letter code.

![10. Conducive Conditions with 10A checked and 10B choices such as Wood to Ground Contact (G), Excessive Moisture (J) and Heavy Foliage (N) selected](https://mintcdn.com/hiveinspect-43c85ed1/5ead0qQxg4HJlKk_/images/how-tos/state-forms/texas-wdi-conducive-conditions.png?fit=max\&auto=format\&n=5ead0qQxg4HJlKk_\&q=85\&s=15ba7f3e65eec624eeba08991823be75)

## Part 11: infestation evidence

For each insect, pick **Active Infestation**, **Previous Infestation** or **Previous Treatment**. What you pick prints **Yes** and everything else prints **No**, so an insect you leave blank prints **No** in all three columns. Explain any previous treatment in **11F**.

In **11G**, type the insect and the areas where you saw it. **Visible evidence of** doesn't fill itself in, even though its label says it does, so type it. Keep both short.

![11. Infestation Evidence with 11A Subterranean Termites set to Previous Infestation and Previous Treatment, and the same three choices for Drywood Termites, Formosan Termites and Carpenter Ants](https://mintcdn.com/hiveinspect-43c85ed1/5ead0qQxg4HJlKk_/images/how-tos/state-forms/texas-wdi-infestation.png?fit=max\&auto=format\&n=5ead0qQxg4HJlKk_\&q=85\&s=9b9844afb78373daedc8bab754b0226c)

## Part 12: recommendations

Check **12A** for corrective treatment, or **12B** for a preventive treatment or correction, and type the reason in **Specify reason**. Unchecked prints **No**.

The two questions above them, about mechanical correction, have no spot on this version of the form, so they don't print.

## The diagram and additional comments

The form needs a diagram of the structure. Add it as a photo on **Upload Diagram**, marked up with the form's codes, and Hive fits it into the grid. Explain any other codes in **Other Legend Definitions**. **Additional Comments** prints on the lines below the diagram.

## Part 13: statement of purchaser

Hive doesn't collect the purchaser's signature or initials, so those lines print blank for signing on paper. If the customer or their designee wasn't there, check **Customer or Designee Not Present**.

## Additional photos

Photos on **Additional Photos** print after the form, four across, with your captions. Keep the captions short, because long ones are cut off. Photos on other comments don't print, except the diagram.

## Keep the template's structure

> [!WARNING]
>
> Don't rename, add or remove comments in this template. Each answer is matched to a spot on the form. If the form stops printing correctly, delete the template and import it again from the Template Hub.

The form has no place for ratings, so turn them off for this template if you see IN, NI, NP and D buttons ([how](https://docs.hiveinspect.com/how-tos/disabling-ratings.md)).

## Check the PDF before you publish

Click **PDF**, then **View PDF**. **Preview** shows the online report, not the form. This form is English only.

![The PDF Report Options window with a Special PDF Template - English Only notice, the English PDF marked Up to date with a View PDF button and a Regenerate link](https://mintcdn.com/hiveinspect-43c85ed1/5ead0qQxg4HJlKk_/images/how-tos/state-forms/pdf-report-options.png?fit=max\&auto=format\&n=5ead0qQxg4HJlKk_\&q=85\&s=500278251ae49118c97d444b57a97059)

The PDF is the four pages of the official form, starting with the scope of inspection, then your additional photos. There's no cover page.

If you change something outside the report, like your WDI License Number or the client's name, click **Regenerate**.

## What your client gets

When you publish, your client's portal leads with **View PDF**, and the report email links straight to the PDF.

## Common questions

> [accordion] Part 11 shows No in all three columns for an insect.
>
> That insect has nothing picked. Pick **Active Infestation**, **Previous Infestation** or **Previous Treatment** for it; whatever you pick prints **Yes**.

> [accordion] How do I check Technician or Certified Applicator?
>
> Check **1E. Inspector is Technician?** or **1E. Inspector is Certified Applicator?** in **1. Company Information**. Each prints in its own box on the form.

> [accordion] How do I make my diagram fill the box?
>
> Add the diagram as the first photo on **Upload Diagram**. Hive fits it into the form's grid, including any markup. A diagram on another comment doesn't print there.

> [accordion] Where does the license number next to my name come from?
>
> From the **WDI License Number** in each assigned inspector's [Profile Settings](https://docs.hiveinspect.com/settings/profile-settings.md). Your SPCS business license goes in **1B** in the report or template.

> [accordion] The company address prints twice on the street line.
>
> **1C. Company Address: Street** holds your full company address by default. Replace it with just your street, once in the template.

> [accordion] Can I preview the PDF before I publish?
>
> Yes. Click **PDF**, then **View PDF** in the report editor. **Preview** opens the online report, not the form.

> [accordion] I imported my WDI form from other software and it prints as a regular report.
>
> Only the Template Hub version prints on the official form. Import **Texas WDI 2020** from the Template Hub and add it to your WDI service instead.

> [accordion] Can I edit the template?
>
> Fill in default answers, such as your SPCS license number, but don't rename, add or remove comments. Each answer is matched to a spot on the form.

## Related

* [TREC REI 7-6](https://docs.hiveinspect.com/how-tos/trec-rei-7-6.md): the Texas property inspection report.
* [NPMA-33 report](https://docs.hiveinspect.com/how-tos/npma-33.md): the wood destroying insect report used in many other states.
* [Import a template](https://docs.hiveinspect.com/how-tos/import-templates.md#special-pdf-templates): every official form in the Template Hub.


This documentation is built and hosted on [Mintlify](https://mintlify.com), a developer documentation platform.