Skip to main content

State form video · 4:18 · All videos · YouTube playlist

In this video

Click a chapter to jump straight to it on YouTube.

Summary

Import it: Templates → Template Hub → Special PDF Only → FL Uniform Mitigation Verification Inspection Form (2026) → Import Template. Only the Hub version prints on the official form; a wind mitigation template copied from other software prints as a regular report. Then add it to your wind mitigation service or add-on in Business Tools → Services & Fees. Still using an older wind mitigation template? Import the 2026 one from the Hub. What fills in: the inspection date, owner name, contact person, cell phone, email and year of the home come from the inspection (you can type over them). Street, city and ZIP always come from the inspection’s address. Type the county, number of stories, home/work phone, insurance company and policy number. Question 1: check A, B or C and the year built and permit application date print on that answer’s line. If you check D, clear Year Built (If A, B, or C), or the year still prints on line A. Question 4.1: one subsection per roof covering (up to four). Pick the covering, then the permit application date, FBC/MDC product approval number and year installed; they print on that covering’s row. For a covering that isn’t listed, pick Other in Roof Covering Type first, then choose the Other Type. Without Other, the type doesn’t print. Questions 5-8 use the form’s own wording. For roof to wall, picking a detail under Clips, Single Wraps or Double Wraps checks that category too. Anything left blank stays blank. Question 9: choose each opening type’s level and the form gets an X in that column, then pick the Opening Protection Overall Rating. Certification: inspector name, license number, company, phone and signature come from Profile Settings; License Type defaults to Home Inspector; the date is the inspection date. Select your license under Qualified Inspector, nothing is checked until you do. Homeowner signature: in the mobile app, My Profile → Tools → Get Signature saves the signature to your photos. Add it as the first photo on Signature, under Homeowner to Complete. Its date is the inspection date. Photos print after the form, two across, under each comment in the Photos subsection. A category you pick on a photo comment is added to its heading (for example Roof Covering: Other). You can add or remove comments in Photos. Add your hurricane mitigation training certificate to Permit Photo(s) / Proof of Hurricane Mitigation Training in your template; it prints while that box is checked. Outside Photos, don’t add, delete or move questions. If the form stops printing correctly, delete the template and import it again from the Hub. Check the form before you publish: Web Editor → PDF → View PDF (Preview shows the web report). English only. After changing something outside the report, click Regenerate. Published, the client portal leads with View PDF.

Step by step

The narration from the video, written out by chapter. Click Watch this part to jump to that moment.

Introduction

Watch this part (0:00) The Florida wind mitigation form in Hive. How to add the 2026 form, answer questions one through nine, add photos and both signatures, and check the PDF.

Import the 2026 form from the Template Hub

Watch this part (0:12) Wind mitigation is a special PDF template. You fill it in like any report, and Hive prints it on Florida’s official form, the April 2026 revision. Open Templates, then the Template Hub, click Special PDF Only, and import the F L Uniform Mitigation Verification Inspection Form, 2026.

Hub version only, then add it to your service

Watch this part (0:34) Only the Hub version prints on the form, so don’t bring a wind mitigation template over from other software. Then add it to your wind mitigation service or add-on, the same way the 4-Point video shows.

The wind mitigation report in the Web Editor

Watch this part (0:47) The whole form is one section. Its subsections follow the form: the general information, questions one through nine, your certification, the homeowner’s part, and Photos.

What fills in from the inspection

Watch this part (1:00) The top of the form fills itself in: the inspection date, the owner’s name, phone and email, and the year of the home. You can type over any of these. The street, city and zip always come from the inspection’s address. Type the county, the number of stories and the policy number.

Question 1: Building Code and Year Built

Watch this part (1:19) Question one. Check A, B or C, and the year built and permit date print on that answer’s line. If you check D, clear Year Built here, or the year still prints on line A.

Question 4: roof coverings, and Other

Watch this part (1:33) Question four has a subsection for each roof covering, up to four. Pick the covering, then add the permit date, product approval number and year installed. They print on that covering’s row. For a covering that isn’t listed, pick Other first, then choose the type, like Modified Bitumen. Without Other, the type doesn’t print.

Questions 5 to 8

Watch this part (1:54) Questions five through eight use the form’s own wording. Check the answer that applies. For roof to wall, picking a detail under Clips, Single Wraps or Double Wraps checks that category too. Anything you leave blank stays blank.

Question 9: opening protection

Watch this part (2:09) Question nine is the opening protection table. For each type of opening, choose its level, and the form gets an X in that column. Then pick the overall rating, like X, for no windborne debris protection.

Your certification and Qualified Inspector

Watch this part (2:23) The certification fills in from your profile: your name, license number, company, phone and signature, and the inspection date. Under Qualified Inspector, select the license you hold. Nothing is checked until you do.

The homeowner signature

Watch this part (2:39) The homeowner signs too. In the mobile app, go to My Profile, Tools, Get Signature, and have them sign. It’s saved to your photos. Add it as the first photo on Signature, under Homeowner to Complete.

Photos and headings

Watch this part (2:53) Photos print after the form, two across, under each comment in the Photos subsection. Pick a category on a photo comment, and it’s added to the heading, like Roof Covering: Other. You can add or remove comments in Photos. Put your mitigation training certificate on Permit Photos in your template, and it prints while that box is checked.

Keep the structure

Watch this part (3:19) Outside Photos, don’t add, delete or move questions. Hive matches each answer to its spot on the form, so a change can print in the wrong place, or not at all. If the form breaks, import it again from the Hub.

Check the PDF before you publish

Watch this part (3:35) To check the form, click PDF, then View PDF. Preview shows the web report, not the form. Wind mitigation is English only.

What’s in the PDF

Watch this part (3:46) After your cover page come the six pages of the official form, with your initials and the address on every page. Then your photo pages. If you change something outside the report, like the client’s name or your signature, click Regenerate to rebuild the PDF.

What your client gets

Watch this part (4:04) When you publish, your client’s portal leads with View PDF for this report, and the report email links straight to the PDF. That’s the Florida wind mitigation form in Hive.

Written guide

Keep going

Last modified on November 12, 2026