Skip to main content

In the dashboard: Templates → Template Hub → Special PDF Only → FL Uniform Mitigation Verification Inspection Form (2026) · Watch the video walkthrough

The Uniform Mitigation Verification Inspection Form (OIR-B1-1802, the April 2026 revision) is the Florida wind mitigation form that homeowners send to their insurer for wind discounts. In Hive it’s a special PDF template: you fill it in like any report, and Hive prints your answers on the official form. The first page of a finished Uniform Mitigation Verification Inspection Form: inspection date November 10, 2026, owner Elena Brooks, 1418 Palmetto Grove Lane, Sarasota, county Sarasota, year of home 1987, then question 1 Building Code with D checked and the start of question 4 Roof Covering

Import the form from the Template Hub

Only the Hub version prints on the form, so don’t bring a wind mitigation template over from other software.
1

Open the Template Hub

Go to Templates, click Template Hub, then Special PDF Only.
2

Import the 2026 form

Find FL Uniform Mitigation Verification Inspection Form (2026) and click Import Template.
3

Add it to your service

In Business Tools → Services and Fees, add the template to your wind mitigation service or add-on.
If you used an older wind mitigation template, switch your service to the 2026 one so new inspections print on the current form.

How the report is laid out

The whole form is one section. Its subsections follow the form: General Information (Auto-filled), questions 1 to 9, Inspector Information & Certification, Homeowner to Complete and Photos. Open the section, then a subsection, to see its questions.

What fills in for you

You can type over the date, owner details and year of the home in the report. Type the County, the # of Stories and the Policy number yourself. General Information (Auto-filled) in the Web Editor with Inspection Date, and Owner/Client Name open showing the client_full_name placeholder

Questions 1 to 9

Question 1: Building Code

Check A, B or C, and the year built and permit date print on that answer’s line. If you check D, clear Year Built in this subsection, or the year still prints on line A. Question 1 Building Code with the answers A, B, C and D (Unknown or does not meet the requirements), D checked, and Year Built and Building Permit Application Date below

Question 4: Roof coverings

Question 4 has a subsection for each roof covering, up to four (4.1 Roof Covering Type 1 to Type 4).
  1. Pick the covering.
  2. Add the Permit Application Date, the FBC/MDC Product Approval # and the Year of Original Installation/Replacement. They print on that covering’s row.
  3. For a covering that isn’t listed, pick Other first, then choose the type, such as Modified Bitumen. Without Other, the type doesn’t print.
4.1 Roof Covering Type 1 with Other selected and Other Type set to Modified Bitumen, followed by Permit Application Date, FBC/MDC Product Approval # and Year of Original Installation/Replacement

Questions 5 to 8

These use the form’s own wording. Check the answer that applies. For Roof to Wall Attachment, picking a detail under Clips, Single Wraps or Double Wraps checks that category too. Anything you leave blank stays blank.

Question 9: Opening protection

For each type of opening, choose its level, and the form gets an X in that column. Then pick the overall rating, such as X (No windborne debris protection). 9. Opening Protection, Glazed Windows or Entry Doors, with levels from N/A to Z and X (No windborne debris protection) selected

Your certification and Qualified Inspector

Inspector Information & Certification fills in from your profile: your name, license number, company, phone and signature, and the inspection date. Under Qualified Inspector, select the license you hold. Nothing is checked until you do. Set your License Number, signature and company details in Profile Settings. Inspector Information and Certification with Inspector Name, License Type, License or Certificate #, Inspection Company and Phone, and the Qualified Inspector choices with Home inspector licensed under Section 468.8314 Florida Statutes selected

The homeowner signature

The homeowner signs too:
  1. In the mobile app, go to My Profile → Tools → Get Signature and have the homeowner sign. The signature is saved to your photos.
  2. Add it as the first photo on Signature, under Homeowner to Complete.
Homeowner to Complete with the Signature comment open and a homeowner signature image attached as its first photo, and a Date comment below

Photos

Photos print after the form, two across, under each comment in the Photos subsection.
  • Pick a category on a photo comment and it’s added to the heading, such as Roof Covering: Other.
  • You can add or remove comments in Photos. That’s the only place where the structure can change.
  • Put your mitigation training certificate on Permit Photos in your template. It prints while that comment is checked.

Keep the template’s structure

Outside Photos, don’t add, delete or move questions. Hive matches each answer to its spot on the form, so a change can print in the wrong place or not at all. If the form breaks, import it again from the Template Hub.
The form has no place for ratings, so IN, NI, NP and D never print on it. If your copy of the template shows rating buttons, you can turn ratings off for it.

Check the PDF before you publish

Click PDF, then View PDF. Preview shows the online report, not the form. Wind mitigation is English only. The PDF Report Options window with a Special PDF Template - English Only notice, the English PDF marked Up to date with a View PDF button and a Regenerate link The PDF has your cover page, then the six pages of the official form, with your initials and the address on every page, then your photo pages. If you change something outside the report, like the client’s name or your signature, click Regenerate to rebuild the PDF.

What your client gets

When you publish, your client’s portal leads with View PDF for this report, and the report email links straight to the PDF.

Common questions

In the mobile app, go to My Profile → Tools → Get Signature and have them sign. Then add the saved image as the first photo on Signature under Homeowner to Complete. You don’t need to add a new comment for it.
Pick Other first, then the type. Without Other, the type doesn’t print. Each roof covering has its own subsection (4.1 Type 1 to Type 4), and its dates and approval number print on that covering’s row.
Clear Year Built in the 1. Building Code subsection when you check D. Otherwise the year still prints on line A.
No. Type the County in General Information (Auto-filled). The street, city and zip come from the inspection’s address.
Yes, within the Photos subsection. You can add or remove photo comments there, and the category you pick on a photo comment is added to its heading. Don’t change anything outside Photos.
Preview shows the online report. Click PDF, then View PDF to see the form. If the PDF also looks like a regular report, the template didn’t come from the Template Hub: import FL Uniform Mitigation Verification Inspection Form (2026) and use it instead.
Add both templates to the inspection. Each becomes its own report with its own PDF.
Last modified on November 12, 2026