Skip to main content

State form video · 5:35 · All videos · YouTube playlist

In this video

Click a chapter to jump straight to it on YouTube.

Summary

Import it: Templates → Template Hub → Special PDF Only → Texas WDI 2020. Only the Hub version prints on the form. Then add it to your WDI service or add-on in Business Tools → Services & Fees. Part 1: the inspected address (every page), the assigned inspectors, the inspection date, and your company name, address and phone fill in for you. Type your SPCS business license number once in the template and check Certified Applicator or Technician. Tip: the company street line uses your full company address, so city, state and zip print twice; type just your street there, once in the template. Parts 2 to 6: the purchaser starts with your client’s name; pick their role, type the owner or seller, and pick who gets the report. Pick the structures, foundation, siding and roof (for anything else pick Other and type it). Fill in Treatment Details only when your company treated the structure; a blank warranty question prints No. Part 7: Hive prints your signature, and each assigned inspector’s name with their WDI License Number from Profile Settings. Type any apprentices or technicians present in 7B. Parts 8 to 10: pick where the notice was posted and type the date. Inaccessible areas and conducive conditions are checkboxes: checked prints Yes, unchecked prints No. Then pick the areas or conditions; each one checks its box. Part 11: for each insect pick Active Infestation, Previous Infestation or Previous Treatment. What you pick prints Yes and everything else prints No. Explain previous treatment in 11F. In 11G, type the insect and the areas; “Visible evidence of” doesn’t fill itself in. Part 12: check 12A (corrective) or 12B (preventive) and type the reason; unchecked prints No. The two mechanical-correction questions have no spot on this form and don’t print. Diagram: add it as a photo on Upload Diagram, marked up with the form’s codes; Hive fits it into the grid. Other Legend Definitions prints after “Other(s) – Specify”, and Additional Comments on the lines below the diagram. Part 13: Hive doesn’t collect the purchaser’s signature or initials; those lines print blank for signing on paper. If the customer or designee wasn’t there, check Customer or Designee Not Present. Photos on Additional Photos print after the form, four across, with your captions (long captions are cut off). Photos on other comments don’t print, except the diagram. Don’t rename, add or remove comments in this template; if the form stops printing correctly, import it again from the Hub. Check it with PDF → View PDF (Preview shows the web report). The PDF is the four form pages, then your photos; no cover page. English only. Click Regenerate after outside changes. Published, the portal and the report email lead with the PDF.

Step by step

The narration from the video, written out by chapter. Click Watch this part to jump to that moment.

Introduction

Watch this part (0:00) The Texas Official Wood Destroying Insect Report in Hive. How to add it, fill in each part, attach the diagram and photos, and check the PDF.

Import the Texas WDI form from the Template Hub

Watch this part (0:11) The Texas WDI form is a special PDF template. You fill it in like any report, and Hive prints it on the state’s official form, SPCS T-5. Open Templates, then the Template Hub, click Special PDF Only, and import Texas WDI 2020.

Hub version only, then add it to your service

Watch this part (0:30) Only the Hub version prints on the form. A WDI form copied from other software prints as a regular report. Then add the template to your termite or WDI service or add-on, the same way the 4-Point video shows.

The WDI report in the Web Editor

Watch this part (0:45) The template follows the form, one subsection per part: company, purchaser, owner, structures, treatment, signatures, notice, inaccessible areas, conducive conditions, the diagram, infestation evidence, recommendations, the purchaser’s statement, and photos.

What fills in for part one

Watch this part (1:06) Much of part one fills itself in. The inspected address prints at the top of every page, from the inspection. Name of Inspector lists every inspector assigned to the inspection. The company name, address and phone come from your company details, and the date from the inspection.

SPCS license, applicator or technician, and the company street line

Watch this part (1:25) Type your SPCS business license number once in the template, so every report starts with it, and check Certified Applicator or Technician. One tip: the company street line uses your full company address, so the city, state and zip print twice. Type just your street there, once in the template.

Purchaser, owner and who gets the report

Watch this part (1:46) Part two starts with your client’s name as the person purchasing the inspection. Pick whether they’re the buyer, seller, agent or someone else. Then type the owner or seller, and pick who the report is forwarded to.

Structures inspected and treatment details

Watch this part (2:00) Under Structures Inspected, pick the structures, then the foundation, siding and roof, and each one checks its box. For anything else, pick Other and type it below. Fill in Treatment Details only when your company treated the structure. Left blank, the warranty question prints No.

Signatures and your WDI License Number

Watch this part (2:22) For the signature, Hive prints your signature, and each assigned inspector’s name with their WDI License Number from Profile Settings, so add that number there. Type any apprentices or technicians who were present in 7B.

Notice of inspection and inaccessible areas

Watch this part (2:38) Pick where you posted the notice of inspection, and type the date. For inaccessible areas, check the box for Yes. Unchecked prints No. Then pick the areas, and for anything else, pick Other and add it under specify.

Conducive conditions

Watch this part (2:53) Conducive conditions work the same way. Check the box, then pick each condition. Each one checks its box on the form, next to its letter code.

Part 11: infestation evidence, Yes or No

Watch this part (3:04) For each insect in part eleven, pick Active Infestation, Previous Infestation or Previous Treatment. What you pick prints Yes, and everything else prints No, so an insect you leave blank prints No in all three columns. Explain any previous treatment in 11F.

11G: visible evidence and areas

Watch this part (3:21) In 11G, type the insect and the areas where you saw it. Visible evidence of doesn’t fill itself in, even though its label says it does, so type it. Keep both short.

Part 12: recommendations

Watch this part (3:35) For recommendations, check 12A for corrective treatment, or 12B for a preventive treatment or correction, and type the reason. Unchecked prints No. The two questions above them, about mechanical correction, have no spot on this form, so they don’t print.

The diagram and additional comments

Watch this part (3:52) The form needs a diagram of the structure. Add it as a photo on Upload Diagram, marked up with the form’s codes, and Hive fits it into the grid. Explain any other codes in Other Legend Definitions. Additional Comments prints on the lines below the diagram.

Statement of purchaser

Watch this part (4:10) Part thirteen is the purchaser’s statement. Hive doesn’t collect the purchaser’s signature or initials, so those lines print blank for signing on paper. If the customer or their designee wasn’t there, check Customer or Designee Not Present.

Additional photos

Watch this part (4:26) Photos on Additional Photos print after the form, four across, with your captions. Keep the captions short, because long ones are cut off. Photos on other comments don’t print, except the diagram.

Keep the structure

Watch this part (4:39) Don’t rename, add or remove comments in this template. Each answer is matched to a spot on the form. If the form stops printing correctly, delete the template and import it again from the Hub.

Check the PDF before you publish

Watch this part (4:52) To check it, click PDF, then View PDF. Preview shows the web report, not the form. This form is English only.

What’s in the PDF

Watch this part (5:02) The PDF is the four pages of the official form, starting with the scope of inspection, then your additional photos. There’s no cover page.

Regenerate after outside changes

Watch this part (5:12) If you change something outside the report, like your WDI license number or the client’s name, click Regenerate. When you publish, your client’s portal leads with View PDF, and the report email links straight to the PDF. That’s the Texas WDI form in Hive.

Written guide

Keep going

Last modified on November 12, 2026